The American-style 15kV/200A elbow connector is designed for 200A electrical systems, widely used for high-voltage electrical connections in pad-mounted transformers, ring main units cable branch boxes, underground transformers, and other electrical equipment.

This series of transformers adopts a pillar-type structure with fully enclosed epoxy resin casting. The transformer consists of three independent windings connected in a Y-Y configuration. 

Normal use conditions of the product
Ambient air temperature:+40℃- -45℃；
Monthly average hot temperature:+30℃；
Annual average hot temperature:+20℃；
Altitude:≤1000m；
Pollution level: class Ⅲ；
Power supply voltage waveform: approximately sine wave.

Tank : Mild steel
Steel HV/LV compartment barrier
Padlocking facility with penta-head bolt on the HV and LV, Three-point latching mechanism.
HV and LV compartment doors-hinged and lift-off type with 120° holding bars
Stainless steel door hinges
Removable sill for easy installation

The problem of electric field stress concentration at that high-voltage connection and the fracture of the cable out shielding lay can be well solved;

Adopt high-quality EPDM raw materials, which has excellent corona resistance, free discharge resistance and weather resistance;

Fully insulated, fully sealed and fully shielded.

Meeting IEEE, IEC, and various national standards. 
Core and Winding: CRGO Slicon Steel Metal Core or Amorphous Metal Core, Copper or Aluminum Winding.
Automatic pressure relief valve.
PCB free insulation oil.
Electrostatic powder painting for corrosion prevention.

Low loss and low noise.
No pollution, maintenance-free, easy to install and low overall operating cost.
Small size and light weight.
High mechanical strength, strong resistance to temperature changes and short circuit resistance.
Moisture-proof and corrosion-resistant, it can operate in high humidity.
Economical installation, can be installed in load centers without special foundation.