This pole integrally integrates a zero-sequence voltage sensor and an electromagnetic current sensor (including phase sequence and zero sequence). 

It is suitable for matching use with corresponding indoor and outdoor vacuum circuit breakers or vacuum distribution equipment.

It is applicable to oil-immersed transformers and switchgear, featuring a copper current path with the insertion hole interface eliminated.

The 15kV shielded mini front connector is suitable for being combined with PT plugs via cables to form a connection kit, and is applicable to the connection mode of C-type bushing outlet and PT bushing outlet.

The PT connection kit is designed for electrical connection between two pieces of equipment, enabling the connection of the potential transformer (PT) and the gas-insulated switchgear unit.

It is applicable to AC power systems with a rated frequency of 50 or 60Hz and a rated voltage of 35kV and below, and is used for voltage measurement, electric energy metering and relay protection.

It is applicable to AC power systems with a rated frequency of 50 or 60Hz and a rated voltage of 20kV and below, and is used for voltage measurement, electric energy metering and relay protection.

It is suitable for use in outdoor environments with UV resistance, as well as pollution and moisture resistance, and is also applicable for use in tropical regions.

It is applicable to AC power systems with a rated frequency of 50 or 60Hz and a rated voltage of 10kV and below, for the purposes of current measurement, electric energy metering and relay protection.

It is applicable to AC power systems with a rated frequency of 50 or 60Hz and a rated voltage of 10kV and below, and is used for voltage measurement, electric energy metering and relay protection.

It is applicable to AC power systems with a rated frequency of 50 or 60Hz and a rated voltage of 10kV and below, for current measurement, electric energy metering and relay protection purposes.

This transformer is a fully enclosed epoxy resin cast insulation structure voltage transformer, suitable for AC power systems with rated frequencies of 50 or 60Hz and rated voltages up to 3, 6, 10kV and below.

LDZC-10 high-precision current transformer is suitable for current and power measurement and protection of power supply and use equipment of cable lines below 35kV and 10kV in AC power systems. 

This series of transformers are pillar-type structures, fully enclosed and cast with epoxy resin, and covered with silicone rubber insulation. They are suitable for outdoor use, UV-resistant, pollution-resistant and moisture-resistant, and are also suitable for use in tropical areas.

LDZC-10 high-precision current transformer is suitable for current and power measurement and protection of power supply and use equipment of cable lines below 35kV and 10kV in AC power systems.

Applicable to underground transformers and conventional pad-mounted transformers, providing connection interfaces for 200A cable joints.

The American-style 15kV/200A elbow connector is designed for 200A electrical systems, widely used for high-voltage electrical connections in pad-mounted transformers, ring main units cable branch boxes, underground transformers, and other electrical equipment.

This series of transformers adopts a pillar-type structure with fully enclosed epoxy resin casting. The transformer consists of three independent windings connected in a Y-Y configuration. 

This series of transformers is a pillar structure, using epoxy resin fully enclosed casting, the transformer is made of three independent transformer windings through Y-Y wiring.

This series of transformers is a pillar structure, using epoxy resin fully enclosed casting, the transformer is composed of two independent transformer windings through V-V wiring to achieve voltage measurement and protection of the three-phase voltage system.