A single battery module is an integrated unit formed by multiple cells connected in series/parallel configurations.

The CK-NL-372 Smart Energy Storage Cabinet is a distributed energy storage system suitable for industrial and commercial scenarios.

The Light Engine Fast Charging is an integrated device combining energy storage systems and charging functions, designed to achieve efficient utilization of renewable energy, reduce energy costs, and enhance the reliability and stability of energy systems.

Strong expansion, supporting multi-machine expansion
Integrated integration: compact structure design, efficient integration with smaller volume, suitable for different scenarios.
Rated voltage of DC side: 768Vdc
Size: 1700mm*1405mm*2150mm

The Integrated Power Conversion and Voltage Boosting Cabinet serves as the power unit of energy storage systems. 

Suitable for plugging the cable accessories of RMU after installation, and is used with the front connector, rear connector and rear surge arrester produced by our company.

Suitable for environmental protection air insulated RMU, one end is sealed in environmental protection air, and the other end can be connected to the front connector. 

Comking Electric's Generation-Grid-Load-Storage Integrated Platform provides users with a convenient, efficient, and secure full-chain energy management solution.

Chinese-type delivery substation, commonly referred to as the delivery substation manufactured with national standard. The Chinese-type delivery substation YBF口-40.5/0.69kV is a power equipment that integrates high-voltage switchgear, transformer, and protective fuses in the oil tank, with low-voltage switchgear and corresponding auxiliary equipment. 

The JP series low-voltage comprehensive distribution switchgear is suitable for transmission and distribution systems with AC 50Hz and rated voltage below 0.4kV. 

The CXGN-12 box type fixed AC metal enclosed switchgear is a high-voltage equipment of the delivery substation independently developed by our company. 

CKVB-12 indoor vacuum circuit breaker is suitable for indoor switchgear of three-phase AC 50Hz and rated voltage 12kV power system. It is suitable for power plants, substations and distribution rooms in power systems, especially in places where frequency operation at rated operating current or multiple switching and closing of short-circuit currents is required. 

1.Stable insulation performance：Vacuum bubble installed inside the ring network resin insulation cylinder.
2.High protection level：Interlocking mechanism, automatically meeting the "five prevention" requirements.
3.Good suitability：Vacuum switch, capable of breaking 20kA short-circuit current, combined with protective devices, can achieve various protection functions.

Rated Specifications: Frequency: 50 Hz/60 Hz (Universal) 
AC Current: 5 A or 1 A (Universal) 
Power Supply: DC 48 V, ±20%    
DC24V，±20%
Self-Powered, drawing power from the phase current transformer

Rated specifications: AC voltage: 100 V or 220 V        
AC current: 5 A or 1 A
Frequency: 50 Hz
Power Supply: AC 220 (110) V,±20%DC220（110）V，±20%

Rated Specifications: AC Voltage: 57.73 V (Line Voltage)
AC Current: 5 A or 1 A
Frequency: 50 Hz        
Power Supply: AC 220 V, ±20%     

Direct current power supply: AC220V, DC220V, DC48V, DC24V, Allowable deviation: ±20％ 
Input voltage for switch quantity and status quantity: DC 48V, DC 24V, with starting voltage ( 60%～75% )
Measured current: AC 0A～6A  
Zero-sequence current: AC 0A～100A 
Alternating current voltage: AC 0V～450V 

Maximum support for 16 circuit loop intervals
3 channels of remote measurement: IA, IB, IC, or IA, IC, 3I0
6 channels of remote signals: open position, closed position, not stored energy, grounding switch, isolation, standby
2 channels of remote control: trip, close
Voltage and current at 0.2 level, power at 0.5 level, frequency at ±0.01 level

Rated Specifications: AC Voltage (to be specified at the time of order): 100 V or 220 V 
AC Current (to be specified at the time of order): 5 A or 1 A 
Frequency: 50 Hz 
Power Supply (to be specified at the time of order): AC 85 to 264 V 
DC100~264V 
DC 24 V or DC 48 V, ±20%

Application scenarios
1. Daily charging of electric vehicle users
2. Public transportation, such as electric bus charging
3. Logistics and transportation, such as electric truck charging
4. Charging network management of charging service operators