CK-NL-5000 Container Liquid-cooled Energy Storage System are based on standard modules, and integrated with battery management system (BMS), converter cabinet (PCS), power distribution system, thermal management system, fire protection system and intelligent remote management system.

Rated voltage: 716.8V
Operating voltage: 650~949V
Rated energy:    200.7KWh
Size: 2234mm*1272mm*2565mm
Cooling method: Air Cooling

1. Three working power supplies are available, including 85-265VAC, 100-264VDC, 24VDC, and 48VDC.
2. It has 6 switch input circuits.
3. Sampling accuracy: voltage <0.5%, current <0.5%, zero-sequence voltage <0.5%, zero-sequence current <0.01A
4. Remote signal resolution: ≤1ms, anti-shake 1~99999ms.

10kV European-type delivery substation is a type of prefabricated kiosk type substation, which is basically the same as the principle of traditional civil engineering electrical rooms. It is to input high-voltage power through high-voltage switchgear, reduce voltage through transformers, and then distribute electricity through low-voltage switchgear.

KYN28A-12/24 metal-clad withdrawable switchgear (hereinafter referred to as KYN28A-12/24 switchgear) is suitable for three-phase AC 50Hz, 3.6-24kV single busbar and single busbar segmented power systems, and is used as a transmission control device for receiving and distributing electrical energy.

The GCK/GCS/MNS low-voltage withdrawable switchgear (hereinafter referred to as the switchgear) consists of two parts: the power distribution center (PC) cabinet and the motor control center (MCC). This device is suitable for control electrical systems with an AC frequency of 50 (60) Hz, a rated working voltage of 660V-690V or less, and a rated current of 4000A or less (where the rated current of the MNS cabinet can reach 6300A).

Meeting IEEE, IEC, and various national standards. 
Core and Winding: CRGO Slicon Steel Metal Core or Amorphous Metal Core, Copper or Aluminum Winding.
Automatic pressure relief valve.
PCB free insulation oil.
Electrostatic powder painting for corrosion prevention.

Low loss and low noise.
No pollution, maintenance-free, easy to install and low overall operating cost.
Small size and light weight.
High mechanical strength, strong resistance to temperature changes and short circuit resistance.
Moisture-proof and corrosion-resistant, it can operate in high humidity.
Economical installation, can be installed in load centers without special foundation.